Info Report References Participants
Datasheets
Here's the list of components in the pack, with links to datasheets.
- 1 Arduino NG Board + 1 USB cable
- 1 Straight single line pinhead connectors 2,54 40x1
- 1 Breadboard, 840 tie points
- 1 Set of 70 breadboard jumper wires
- 5 10K Ohm Resistors 1/4W
- 5 2.2K Ohm Resistor 1/4 W
- 10 220 Ohm Resistors 1/4W
- 5 330K Ohm Resistors 1/4W
- 5 100nF capacitor polyester
- 5 10nF capacitor polyester
- 3 100uF electrolytic capacitor 25Vdc
- 1 4,7K Ohm Thermistor
- 1 70..100K Ohm VT90N2 Light-Dependent Resistor (LDR) (some info on choosing an LDR)
- 3 5mm RED LED
- 1 5mm GREEN LED
- 1 5mm YELLOW LED
- 1 10Kohm linear potentiometer, pcb terminals
- 5 BC547 Transistor in TO-92 Package
- 1 Piezo buzzer PT-2726P
- 1 Bipolar hall sensor SS41 - more on hall-effect applications.
- 5 PCB Pushbutton, 12x12mm size
- 4 4N35 Optocoupler DIL-6 package
- 4 Tilt sensor (361-5087)
- 1 Diode 1n4007
- 1 MOS Irf540
I found the list of pack components here at pcb-europe.net